added systemd service config files and misc changes, still need to finish writing the reworked tse box controller

barco.service

@@ -0,0 +1,16 @@
+[Unit]
+Description=Barco projector control
+After=mqtt_init.service
+
+
+[Service]
+ExecStart=/usr/bin/python3 /home/rpi/barco_telnet_control.py
+User=rpi
+Group=rpi
+Type=simple
+Restart=always
+
+
+[Install]
+WantedBy=mqtt_init.service
+

barco_telnet/barco_telnet_control.py

@@ -32,9 +32,9 @@ def parse_barco_response(raw: str):
 
 
 async def barco_telnet_command(client, writer, select: str):
-    onSub = f"p1/projektorji/{select}/#"
+    onSub = f"p1/projectors/{select}/#"
-    print('TEST', onSub)
+    #print('TEST', onSub)
-    onMatch = f"p1/projektorji/{select}/ukaz/+"
+    onMatch = f"p1/projectors/{select}/command/+"
     await client.subscribe(onSub)
     async with client.messages() as msgs:
         async for mesg in msgs:
@@ -46,7 +46,7 @@ async def barco_telnet_command(client, writer, select: str):
                 # print("test")
                 cmd = mesg.topic.value.split("/")[-1]
                 #val = '1' if mesg.payload.decode() == 'ON' else '0'
-                val = '1' if mesg.payload.decode() == 'ON' else '0'
+                val = '1' if mesg.payload.decode() == 'ON' else '0' # refactor to direct 0 and 1
                 barcoCmd = f"[{cmdMap[cmd]}{val}]"
                 print("Received: [" + mesg.topic.value + "] payload: [" + mesg.payload.decode() + "]")
                 print("Sending command to Barco: " + barcoCmd)
@@ -62,7 +62,7 @@ async def barco_telnet_read_status(client, reader, select: str):
         if parsed == None:
             continue  #TODO alert for errors
         print(f"Updating topic [{parsed[0]}] with value [{parsed[1]}]")
-        await client.publish(f"p1/projektorji/{select}/status/{parsed[0]}", payload=parsed[1])
+        await client.publish(f"p1/projectors/{select}/status/{parsed[0]}", payload=parsed[1])
 
 
 async def barco_telnet_query_status(writer, select: str):

eth0.notwork

@@ -0,0 +1,8 @@
+[Match]
+
+Name=eth0
+
+[Network]
+Address=192.168.192.42
+Gateway=192.168.192.1
+

extron_audio.service

@@ -0,0 +1,13 @@
+[Unit]
+Description=Extron audio matrix control
+After=mqtt_init.service
+
+[Service]
+ExecStart=/usr/bin/python3 /home/rpi/extron_audio_matrix_telnet_control.py
+Type=simple
+Restart=always
+
+[Install]
+WantedBy=mqtt_init.service
+
+

interfaces.save

@@ -0,0 +1,3 @@
+# interfaces(5) file used by ifup(8) and ifdown(8)
+# Include files from /etc/network/interfaces.d:
+source /etc/network/interfaces.d/*

mqtt_init.service

@@ -0,0 +1,11 @@
+[Unit]
+Description=Sets up MQTT topics
+After=multi-user.target
+
+[Service]
+ExecStart =/usr/bin/python3 /home/rpi/mqtt_init_topics.py
+Type=simple
+
+[Install]
+WantedBy=multi-user.target
+

projector_motors.service

@@ -0,0 +1,12 @@
+[Unit]
+Description=Control for projector motors
+After=mqtt_init.service
+
+[Service]
+ExecStart=/usr/bin/python3 /home/rpi/projector_motors.py
+Restart=always
+Type=simple
+
+[Install]
+WantedBy=mqtt_init.service
+

tse_box.service

@@ -0,0 +1,15 @@
+[Unit]
+Description=TSE serial control
+After=mqtt_init.service
+
+[Service]
+ExecStart=/usr/bin/python3 /home/rpi/tse_serial_controler.py /home/rpi/tse_serial_interpreter.py
+Type=simple
+Restart=always
+User=rpi
+Group=rpi
+
+[Install]
+WantedBy=mqtt_init.service
+
+

tse_releji_mapping.txt

@@ -0,0 +1,13 @@
+1 - sistem
+2 - ozvocenje
+3 - projektorji
+4 - ?
+5 - platno 1 dol
+6 - platno 1 gor
+7 - platno 2 dol
+8 - platno 2 gor
+9 - sencilo dol
+10 - sencilo gor
+11 - ?
+12 - ?
+

tse_serial/tse_serial_controler.py

@@ -4,8 +4,10 @@ import aioserial
 import aiomqtt
 from tse_serial_interpreter import *
 
+room = 'p1' #TODO make be do get fronm file of configuration 
+
 aser: aioserial.AioSerial = aioserial.AioSerial(
-    port='/dev/cu.usbserial-14240',
+    port='/dev/cu.usbserial-14240', #TODO not hardcode it
     baudrate=1200,
     parity=serial.PARITY_NONE,
     bytesize=serial.EIGHTBITS,
@@ -13,13 +15,43 @@ aser: aioserial.AioSerial = aioserial.AioSerial(
     )
 # TODO adjust serial on actual TSE interface
 
+mapping = {
+    "master": 1,
+    "audio": 2,
+    "projectors": 3,
+
+    "platno_glavni_dol": 5,
+    "platno_glavni_gor": 6,
+    "platno_stranski_dol": 7,
+    "platno_stranski_gor": 8,
+    "sencilo_dol": 9,
+    "sencilo_gor": 10
+
+    #ostalo reserved
+}
+
+reverse_lookup = {v: k for k, v in mapping.items()}
+
+def parse_topic_from_mqtt(topic: str):
+    topicArr = topic.split()
+
+
+
 async def task_status2mqtt(statusClient: aiomqtt.Client):
     while True:
         data = await aser.read_until_async()
         data = data.decode(errors='ignore').strip()
         print("TSE box sent: " + data)
         relState = resp_to_relay_state(data)
-        publishTopic = f"p1/tseRelays/{relState.relay_id}/status"
+        command = reverse_lookup[relState.relay_id]
+        action = relState.state
+        #TODO havent figured out a clean way to 
+        # get out the action from topic yet as they are
+        # not always on the same level
+
+        # probably just do it the most straight forward way
+        # with some more code 
+        publishTopic = f"{room}/"
         publishPayload = "ON" if relState.state else "OFF"
         print("Publishing [" + publishPayload + "] to topic [" + publishTopic + "]")
         await statusClient.publish(publishTopic, payload=publishPayload)
@@ -34,7 +66,7 @@ async def task_command2serial(controlClient: aiomqtt.Client):
                 msgTopic = mesg.topic.value
                 cmnd = mesg.payload.decode()
                 print("Received: [" + msgTopic + "] payload: [" + cmnd + "]")
-                relay = int(mesg.topic.value.split("/")[-2])
+                relay = int(mesg.topic.value.split("/")[-2]) #TODO different by case
                 cmnd = cmnd == "ON"
                 relState = RelayState(relay, cmnd)
                 setRelay = relay_state_to_cmd(relState)