150 lines
5 KiB
Django/Jinja
150 lines
5 KiB
Django/Jinja
{% set addrs = interfaces | selectattr('name', '==', 'lo') |
|
|
map(attribute='ip_addresses') | first | selectattr('role') %}
|
|
{% set loopback = addrs | selectattr('role.value', '==', 'loopback') | map(attribute='address') -%}
|
|
|
|
frr defaults datacenter
|
|
service integrated-vtysh-config
|
|
log syslog
|
|
|
|
# Without this frr and kernel ECMP routes sometimes get desynced when a link is
|
|
# lost and found. Maybe related to https://github.com/FRRouting/frr/issues/12239.
|
|
zebra nexthop-group keep 1
|
|
|
|
router-id {{ loopback | ipv4 | first | ipaddr('address') }}
|
|
|
|
bfd
|
|
profile fast
|
|
receive-interval 150
|
|
transmit-interval 150
|
|
|
|
# Default VRF has two connections to each exit, one for inside and one
|
|
# for outside networks. The efault route is received from the outside
|
|
# peers and distributed back to inside peers. Routes to office
|
|
# networks and NAT IPs are distributed to outside peers.
|
|
router bgp {{ asn.asn }}
|
|
# Allow multipathing through different ASs with equal path length.
|
|
bgp bestpath as-path multipath-relax
|
|
# NAT IPs are not on any interface so disable checking for it.
|
|
no bgp network import-check
|
|
|
|
{% for group in ['inside', 'outside'] %}
|
|
neighbor {{ group }} peer-group
|
|
neighbor {{ group }} remote-as external
|
|
neighbor {{ group }} capability extended-nexthop
|
|
{% endfor %}
|
|
|
|
{% for iface in interfaces | selectattr('name', 'match', '^lan') %}
|
|
neighbor {{ iface.name }}.2 interface peer-group inside
|
|
neighbor {{ iface.name }}.2 bfd profile fast
|
|
neighbor {{ iface.name }}.4 interface peer-group outside
|
|
neighbor {{ iface.name }}.4 bfd profile fast
|
|
{% endfor %}
|
|
|
|
address-family ipv4 unicast
|
|
{% for network in nat %}
|
|
network {{ network }}
|
|
{% endfor %}
|
|
|
|
redistribute connected route-map loopback
|
|
maximum-paths 16
|
|
|
|
neighbor outside soft-reconfiguration inbound
|
|
neighbor outside route-map outside->default in
|
|
neighbor outside route-map default->outside out
|
|
|
|
neighbor inside allowas-in origin
|
|
neighbor inside default-originate
|
|
neighbor inside soft-reconfiguration inbound
|
|
neighbor inside route-map inside->default in
|
|
neighbor inside route-map default->inside out
|
|
exit-address-family
|
|
|
|
address-family ipv6 unicast
|
|
redistribute connected route-map loopback
|
|
maximum-paths 16
|
|
|
|
neighbor outside activate
|
|
neighbor outside soft-reconfiguration inbound
|
|
neighbor outside route-map outside->default in
|
|
neighbor outside route-map default->outside out
|
|
|
|
neighbor inside activate
|
|
neighbor inside allowas-in origin
|
|
neighbor inside default-originate
|
|
neighbor inside soft-reconfiguration inbound
|
|
neighbor inside route-map inside->default in
|
|
neighbor inside route-map default->inside out
|
|
exit-address-family
|
|
|
|
# Prefix lists.
|
|
ip prefix-list default permit 0.0.0.0/0
|
|
ipv6 prefix-list default permit ::/0
|
|
|
|
ip prefix-list fabric permit 10.34.0.0/24 ge 32
|
|
|
|
{% for vlan in vlans | selectattr('role.slug', '==', 'inside') %}
|
|
{% for prefix in query('netbox.netbox.nb_lookup', 'prefixes', api_filter='vlan_id='~vlan.id, raw_data=true) %}
|
|
{% if prefix.family.value == 4 %}
|
|
ip prefix-list office permit {{ prefix.prefix }} ge 24
|
|
{% elif prefix.family.value == 6 %}
|
|
ipv6 prefix-list office permit {{ prefix.prefix }} ge 64
|
|
{% endif %}
|
|
{% endfor %}
|
|
{% endfor %}
|
|
|
|
{% if wg_net is defined %}
|
|
ip prefix-list vpn permit {{ wg_net | ipaddr('subnet') }}
|
|
{% endif %}
|
|
{% if wg_net6 is defined %}
|
|
ipv6 prefix-list vpn permit {{ wg_net6 | ipaddr('subnet') }}
|
|
{% endif %}
|
|
|
|
{% for network in nat %}
|
|
ip prefix-list nat permit {{ network }}
|
|
{% endfor %}
|
|
{# TODO WG endpoint should probably be in a separate prefix-list. #}
|
|
ip prefix-list nat permit {{ wg_ip }}
|
|
|
|
route-map loopback permit 1
|
|
match interface lo
|
|
route-map loopback permit 2
|
|
match interface wg
|
|
|
|
# Get routes to offices from inside peers.
|
|
route-map inside->default permit 10
|
|
match ip address prefix-list fabric
|
|
route-map inside->default permit 20
|
|
match ip address prefix-list office
|
|
route-map inside->default permit 21
|
|
match ipv6 address prefix-list office
|
|
|
|
# Send default route and VPN network to inside peers.
|
|
route-map default->inside permit 1
|
|
match interface lo
|
|
route-map default->inside permit 20
|
|
match ip address prefix-list default
|
|
route-map default->inside permit 21
|
|
match ipv6 address prefix-list default
|
|
# I don’t think these /need/ to be announced separately since we are sending the default route anyway.
|
|
#route-map default->inside permit 30
|
|
# match ip address prefix-list vpn
|
|
#route-map default->inside permit 31
|
|
# match ipv6 address prefix-list vpn
|
|
|
|
# Get default route from outside peers.
|
|
route-map outside->default permit 10
|
|
match ip address prefix-list default
|
|
route-map outside->default permit 11
|
|
match ipv6 address prefix-list default
|
|
|
|
# Send IPv6 office addresses and IPv4 NAT addresses to outside peers
|
|
# so inbound packets go through the firewall.
|
|
route-map default->outside permit 1
|
|
match interface lo
|
|
route-map default->outside permit 11
|
|
match ipv6 address prefix-list office
|
|
route-map default->outside permit 20
|
|
match ip address prefix-list nat
|
|
route-map default->outside permit 31
|
|
match ipv6 address prefix-list vpn
|