Timotej Lazar
6c18e2ff94
firewall: add convenience nftables set for AD ports
...
Probably not all of these are necessary. Would be nice to allow
configuring this from the app.
2024-09-19 16:25:51 +02:00
Timotej Lazar
6322d5ec97
exit: add routes for VPN IPv4 addresses to outside and default VRFs
...
Like commit 7b5980f
2024-09-16 17:20:43 +02:00
Timotej Lazar
7b5980f871
exit: add routes for internal IPv4 addresses to outside VRF
...
Routed through and mostly dropped by the firewall, of course. So we
don’t necessarily have to do NAT for everything that comes from the
old / USI network.
2024-08-13 19:02:03 +02:00
Timotej Lazar
bb41d406f8
exit, firewall: don’t hardcode prefix length
2024-07-10 16:57:08 +02:00
Timotej Lazar
8c82af23e4
firewall: also configure VPN forwards in the app
...
There we can define forwards only for networks with actual VPN users.
2024-05-03 11:27:27 +02:00
Timotej Lazar
7656c05b2d
Revert "firewall: configure NAT from NetBox data"
...
Changed my mind. All NAT and VPN is configured from the app now.
2024-04-30 20:59:49 +02:00
Timotej Lazar
8a9d47f176
firewall: configure NAT from NetBox data
...
This is dynamic NAT for (mostly) physical networks. NAT for custom
prefixes can still be defined in the app.
2024-04-28 15:54:01 +02:00
Timotej Lazar
457ab7d3b7
Query prefixes once for all hosts
...
And group them into vrf_prefixes for VLAN networks and bgp_prefixes for
servers plugged directly into fabric.
This should reduce the number of queries to NetBox when configuring
firewalls and exit switches. Not sure but I think set_fact helps to
avoid queries (as opposed to setting group_vars).
2024-04-28 12:14:05 +02:00
Timotej Lazar
db397cb2b1
exit: store VLAN interface addresses in NetBox
...
… instead of generating them from prefixes. A NetBox script can be
used to create and configure all necessary data for a new VLAN.
Instead of VLAN roles “inside" and “outside” we now create separate
VRFs for inside VLANs to match the actual exit/firewall configuration.
The “outside” VRF is for all VLANs that are directly accessible from
the internet.
2024-04-10 14:03:50 +02:00
Timotej Lazar
6dcae194d7
firewall: accept VPN connections from inside also
...
People tend to leave WireGuard tunnels active and we don’t want things
to become unreachable when moving to one of the inside networks.
2024-04-08 15:03:29 +02:00
Timotej Lazar
1ffdea8e43
firewall: fix duplicate space in template
2024-04-05 12:00:55 +02:00
Timotej Lazar
7ef4023424
firewall: add known IP ranges in network ipset definitions
...
This data should only change in NetBox, so no point deploying it from
firewall master. Sometimes the first approach is the best approach.
2024-03-19 09:46:26 +01:00
Timotej Lazar
ce7c1bd49e
fabric: consolidate interface templates
...
Mostly to avoid special‐casing bond interfaces, and to support BGP
connections over virtual interfaces.
2024-02-27 13:35:29 +01:00
Timotej Lazar
65c16dbc63
Drop BGP update-delay option
...
Dropped from Cumulus manual and advised by seniors.
2024-02-27 13:35:29 +01:00
Timotej Lazar
91afaec9c2
firewall: allow connections from master with NATted IP
2024-02-06 09:19:49 +01:00
Timotej Lazar
f54b23f49a
firewall: disable forwarding for mgmt interfaces in if-pre-up
...
Should be more robust and more importantly works when interfaces are
not renamed by mdev as is the situation now.
2024-01-30 13:11:35 +01:00
Timotej Lazar
544aa0a088
firewall: create empty ipsets for known networks
...
So we don’t crash and burn before config is set up.
2024-01-30 12:37:14 +01:00
Timotej Lazar
aeb124e346
Add inside and outside roles for VLANs
...
Will probably rename inside/outside and office/server to int/ext.
2024-01-30 12:35:33 +01:00
Timotej Lazar
c2d0e88996
firewall: set IPv6 address for wireguard interface
...
And advertise it.
2023-12-18 12:55:50 +01:00
Timotej Lazar
158e8740b8
Initial commit, squashed
2023-12-18 12:55:47 +01:00
Timotej Lazar