network/roles/firewall/templates/frr.conf.j2

{% set addrs = interfaces | selectattr('name', '==', 'lo') |
        map(attribute='ip_addresses') | first | selectattr('role') %}
{% set loopback = addrs | selectattr('role.value', '==', 'loopback') | map(attribute='address') -%}

frr defaults datacenter
service integrated-vtysh-config
log syslog

# Without this frr and kernel ECMP routes sometimes get desynced when a link is
# lost and found. Maybe related to https://github.com/FRRouting/frr/issues/12239.
zebra nexthop-group keep 1

router-id {{ loopback | ipv4 | first | ipaddr('address') }}

# Don’t announce anything at start until we get routes from all our peers.
# Without this packets might get dropped until all routes are synced.
bgp update-delay 10

bfd
  profile fast
    receive-interval 150
    transmit-interval 150

# Default VRF has two connections to each exit, one for inside and one
# for outside networks. The efault route is received from the outside
# peers and distributed back to inside peers. Routes to office
# networks and NAT IPs are distributed to outside peers.
router bgp {{ asn.asn }}
  # Allow multipathing through different ASs with equal path length.
  bgp bestpath as-path multipath-relax
  # NAT IPs are not on any interface so disable checking for it.
  no bgp network import-check

{% for group in ['inside', 'outside'] %}
  neighbor {{ group }} peer-group
  neighbor {{ group }} remote-as external
  neighbor {{ group }} capability extended-nexthop
{% endfor %}

{% for iface in interfaces | selectattr('name', 'match', '^lan') %}
  neighbor {{ iface.name }}.2 interface peer-group inside
  neighbor {{ iface.name }}.2 bfd profile fast
  neighbor {{ iface.name }}.4 interface peer-group outside
  neighbor {{ iface.name }}.4 bfd profile fast
{% endfor %}

  address-family ipv4 unicast
{% for network in nat %}
    network {{ network }}
{% endfor %}

    redistribute connected route-map loopback
    maximum-paths 16

    neighbor outside soft-reconfiguration inbound
    neighbor outside route-map outside->default in
    neighbor outside route-map default->outside out

    neighbor inside allowas-in origin
    neighbor inside default-originate
    neighbor inside soft-reconfiguration inbound
    neighbor inside route-map inside->default in
    neighbor inside route-map default->inside out
  exit-address-family

  address-family ipv6 unicast
    redistribute connected route-map loopback
    maximum-paths 16

    neighbor outside activate
    neighbor outside soft-reconfiguration inbound
    neighbor outside route-map outside->default in
    neighbor outside route-map default->outside out

    neighbor inside activate
    neighbor inside allowas-in origin
    neighbor inside default-originate
    neighbor inside soft-reconfiguration inbound
    neighbor inside route-map inside->default in
    neighbor inside route-map default->inside out
  exit-address-family

# Prefix lists.
ip prefix-list default permit 0.0.0.0/0
ipv6 prefix-list default permit ::/0

ip prefix-list fabric permit 10.34.0.0/24 ge 32

{% for vlan in vlans %}
{% for prefix in query('netbox.netbox.nb_lookup', 'prefixes', api_filter='vlan_id='~vlan.id, raw_data=true) %}
{% if prefix.family.value == 4 %}
ip prefix-list office permit {{ prefix.prefix }} ge 24
{% else %}
ipv6 prefix-list office permit {{ prefix.prefix }} ge 64
{% endif %}
{% endfor %}
{% endfor %}

ip prefix-list vpn permit {{ wg_net | ipaddr('subnet') }}

{% for network in nat %}
ip prefix-list nat permit {{ network }}
{% endfor %}
{# TODO WG endpoint should probably be in a separate prefix-list. #}
ip prefix-list nat permit {{ wg_ip }}

route-map loopback permit 1
  match interface lo

# Get routes to offices and VPN users on other firewalls from inside peers.
route-map inside->default permit 10
  match ip address prefix-list fabric
route-map inside->default permit 20
  match ip address prefix-list office
route-map inside->default permit 21
  match ipv6 address prefix-list office

# Send default route and VPN network to inside peers.
route-map default->inside permit 1
  match interface lo
route-map default->inside permit 20
  match ip address prefix-list default
route-map default->inside permit 21
  match ipv6 address prefix-list default
route-map default->inside permit 30
  match ip address prefix-list vpn

# Get default route from outside peers.
route-map outside->default permit 10
  match ip address prefix-list default
route-map outside->default permit 11
  match ipv6 address prefix-list default

# Send IPv6 office addresses and IPv4 NAT addresses to outside peers
# so inbound packets go through the firewall.
route-map default->outside permit 1
  match interface lo
route-map default->outside permit 11
  match ipv6 address prefix-list office
route-map default->outside permit 20
  match ip address prefix-list nat